KS CozySeam Roof Sandwich Panel
KS CozySeam Roof Sandwich Panel is smart roof, insulated roof system with elegant and modern style roof. Profile is suitable for architecutural design. Excellent waterproofing with the 360 degree seaming system (Architectural Standing Seam) look like seamless roof.
Insulated Roof system is a roof sandwich panel be compose of the top sheet as roofing ‘KS CozySeam’, the bottom sheet as ceiling and ‘EPS Foam Insulation’ insulated in the middle which placed above the purlin structure. Reduce heat and noise from outside as acoustic roof system that make comfortable and cooling inside the building.
System feature :
- Profile cover width is available at 200 - 835 mm.
- Rib height is 26, 38 and 51 mm.
- Thickness of base metal steel is 0.42 - 0.55 mm. (BMT), colorbond at 0.50 - 0.63 mm. (TCT)
- EPS Foam insulation is 25 - 100 mm. (1 - 4 inches)
- Rolled-form from High-tensile steel, min yield strengths are G550 (550MPa), aluminum/zinc alloy-coated steel and clean colorbond prepainted steel
- Standing Seam System: 360 degree seaming
- Recommend min. roof slope is 2 degree
- Application : Straight, Curve, Roofing,Walling
System benefit :
Comfortable Living :
make comfortable and cooling inside the building
Excellent waterproof :
highly water-leakage protection
All-in-one roof & ceiling :
Insulated roof sandwich panel from factory
Save time :
faster and easier installation with one step
Save environment, safe life :
Safe for health and environment friendly
KS CozySeam Roof Sandwich Panel. There are 3 types of system.
Roof Sandwich Panel system is composed of top sheet is roofing ‘KS CosySeam’, and ‘EPS Foam Insulation’ insulated in the middle with high quality and non-flammable grade. Reduce heat and noise from outside with low thermal conductivity. EPS Foam insulation has thickness of 1-4 inches and density of 1.5-2.0 lb/ft3 that help make stronger to roof system. The bottom sheet depends on each system type as following :
Type 1 : Smart type of Roof sandwich panel that bottom sheet is KS-U Sheet make elegant,modern and smart roof.
Type 2 : Splendid type of Roof sandwich panel that bottom sheet is KS Splendid profile looks like slat and keep warm.
Type 3 : Boam type of Roof sandwich panel. There is no bottom sheet, the bottom of the roof panel is EPS foam insulation.
- Method of fixing sheets. Fix the clips to all purlin. Place the sheet over its clips properly. At the side lap of sheet are joined together with standing seam. Seam with Hand Seam and Electric Seamer 180&360 at the edge of each roofing.
- KS CozySeam sandwich panel with 25mm insulation thickness and 350 mm. width, the support spacing recommended 1.2 m.
- In case of special width of roof sandwich panel with 100mm. insulation thickness. The maximum spacing for safe walk on span is 5.9 m
Standing Seam Roof (360 Seam) ซีมลอนปะกบ แบบสันตั้ง 360 degree ด้วยคีมรีดตะเข็บ hand seam นำร่อง แล้วซีมด้วยเครื่องซีมไฟฟ้า Electric seamer
Standard accessories: To prevent the leakage and strengthen the roof system.
- Stainless clip, thickness 0.50mm. (BMT)
- Self-drilling screw (Fastener) complying with AS3566
- Top closer&End closer, thickness 0.42 mm (BMT)
- Flashing, thickness 0.42 mm (BMT)
- Louver, thickness 0.42 mm (BMT)
- Skylight with 2400 g/m2, thickness 1.50 mm
- Tower support, thickness 1.50mm. (BMT)
- C-Clip support, thickness 1.50mm. (BMT)
- Lightning clip, thickness 1.50mm. (BMT)
- Safety Rooftop, thickness 1.50mm. (BMT)