KS TripleSeam110

Product Information

KS TripleSeam110 is the standing seam roof system (Concealed-fixed Roof System), with the Move Clip and 360 degree seaming (double-lock standing seam). The seaming process is field roll-formed 360 degree by seamer machine. Can be rolled-form on-site for long length roof without end lap or custom length as required. Support the expansion and contraction of roof sheet with special clip. For excellent watertightness with 360 degree seaming and Higher rib profile.

  • Profile dimension : Cover width 950/ Rib height 110 mm
  • Base metal Thickness (BMT) : 0.42, 0.45, 0.48, 0.55 mm
  • Zincalume (TCT) : 0.47, 0.50, 0.53, 0.60 mm
  • Strength of Steel : G550 MPa / G300 MPa (Min Yield strength)
  • Coating : Zincalume and Colorbond steel
  • Recommend min. roof slope : 1°
  • Application : Straight, Curve, Roofing
  • Method of installation : Standing Seam system (360 Seaming)

Please download brochure or contact us for more information

Installation Method

1. Fix Baselines to all purlin

2. Fix the first Move Clips (Move Clip Arrow, Move Clip Joint) to all purlin*

3. Fix the first sheet over the Move Clips properly

4. Fix the next Move Clips (Move Clip Arrow, Move Clip Joint) to all purlin

5. Place the next sheet over its clips

6. At the side lap of sheet are joined together with standing seam

6.1 Seam with Hand Seam 180 at the edge of each roofing

6.2 Seam with Electric Seamer 180 at the edge of each roofing

7.1 Seam with Hand Seam 360 at the edge of each roofing

7.2 Seam with Electric Seamer 360 at the edge of each roofing

8. At the middle rib of sheet

8.1 Seam with Hand Seam Arrow

8.2 Seam with Electric Seamer Arrow

9. Fix roofing sheets. Turn up the tray of the sheet at the ridge of roofing

10. Install transparent roof

Remarks: *Recommended to use Fix Clip instead of Move Clip for the end zone only (End zone = 0.3*B (both side) from building edge (B is Building Width). For better control the expansion of the sheet.

Project Reference