Upgrading for nice and worthy roof by Renovate & Reroof
In the past, the roof for factory and house that popular was a roof tile. When using for a long time, it will crack and broken. Upgrading or changing the roof to be nice and worthy is easy and can also create the thermal comfort for the building.
In the past, the roof for factory and house that popular was a roof tile. When using for a long time, it will crack and broken. In the worst case, it might fall down and hurt the inhabitant. If the roof for the factory is galvanized sheet when it degenerates, it can also rust, rot, or leak.
Most people still worry when reroofing about the impact on the old structure, the installation safety, expenses, and time etc.
Despite, don’t worry too much because renovating or reroofing to be nice and worthy is easier than you think. It also can make the comfort living for the building. There are different advantages between the renovating and reroofing as below.
Type 1: RENOVATE ROOF as Double roof system
This method is to fix the roof without removing the old roof. It is quite favor because of these advantages:
- No remove the old roof, so it will not impact the production line or working area in the building
- No remove the old roof, so there is no construction scrap falling into the building which safe for the people inside the building
- Accessories and installation equipment is strong, good performance for roof system
- Can be used with existing roof either metal sheet or roof tile
- Fast installation by planning from the expert team
Type 2: REROOF
By replacing the old roof, there are many advantages but it will be more complicated than type 1.
- Replacing the damaged or old roof to be the new one
- Good performance and beautiful to the roof without increasing more weight on the old structure
- Better drainage and waterproof from the roof as the idea of “Comfort Roof”
- Reducing the damage from removing the old roof sheet, planning and consult by expert team
- Roof installation provides cool condition and energy saving
Conclusion
Upgrading or removing sheet by Renovate Roof (Double roof system) and Reroof, both of them have the different advantages. The inhabitant should choose and evaluate to meet the requirements which will be worthy for money and time.
RELATED TIPS
Adding an elegance and warmth by Concealed-fixed Wall System
Steel Metal Wall Sheet is one of the most popular sheets for cladding into multiple designs, it can be designed for luxury, outstanding with patterns, colors and themes. Besides, Concealed-fixed Walling System creates more beauty of the sheet and overall.
Sharing story from high building through KS FlorDek
The columns height over 50 meters with the symbol “Phi Ta Khon” on the top is located in Loei Province. Feeling a bit shaking and windy at the same time when looking from the top (at steel beam level) when there is no floor.
To reduce the heat inside the factory with KS VentFlow – the ventilation system
Whether it's an old factory or a new factory if there is no opening at the ridge area, the heat will be generated even more inside the building. Especially for the clay tile factory, there will be more heat due to accumulated heat from burning from the kiln. What should we do to cool the temperature inside the building?
Solving the cavity problem under the roof with Steel Closer
One of the problems that most of you always faced is the cavity problem under the roof, not only the space at the rib but also gap between flashings and sheet. There are chances that bird, mouse or insects and little animals can get into the building and build the nest or cause any damages to your building.