One of the problems that most of you always faced is the cavity problem under the roof, not only the space at the rib but also gap between flashings and sheet. There are chances that bird, mouse or insects and little animals can get into the building and build the nest or cause any damages to your building.

Roof is like the protective shield of houses and buildings, not only protect house itself and residents but also protect us from the sun, wind and rain as well. Anyway, there is a problem that most of you always faced, the cavity under the roof at the rib or gap between flashings and sheet (Ridge, Eave and Gutter etc.) that allows bird, mouse or insects and little animals get into the building and build the nest or cause any damages to your building. And therefore, this article will talk and share how to get rid of these problems for your reference.

In order to prevent the problems, KS Group has developed the product called KS Steel End Closer for closing the gaps at the rib and gap between flashing and roof sheet. Due to variety roof profiles, KS Group has many types of Steel end closers to match with each roof profile and also the installation must be corrected, if place at ridge position to close the gap between pan of roof sheet and ridge flashing will use Steel top closer and if place at eave position to close the rib of roof sheet will use Steel end closer.

For ridge flashing, will need technique to support; Turn up the sheet before installing ridge flashing to enhance the performance and ability to prevent water return into the building in case of heavy rain and strong wind KS CozySeam Sandwich Roof Sheet.