KS Roofing Profile Series No.6 KS TriPro75

26/04/2023

KS TriPro75 is the fifth profile for this series, it is a Standing Seam system suitable for extra long roof length and support the expansion and contraction of the roof sheet with the special designed expansion clips.

Standing Seam system with 360degrees seaming
Fix the sheet over the Move clip (Expansion clips), excellent support the expansion of the roof sheet
Min low roof slope at 1degree
High rib at 75mm. and 360degrees seaming to excellent watertightness
Strengthen, profile ability and long support spacing
Flexible, easy to curve and available for multiple designs
Can be rolled-form on-site for long length roof as required
Resistant to weather corrosion which make the building last longer
Fully Roof System with roof sheet, accessories, insulation (heat protection), and ventilation system will reduce heat and create cool temperature to the building

KS TriPro75 is a Standing Seam system, fix the sheet over the Move Clip and 360degrees seaming. Can be rolled-form on-site for long roof length as desired, excellent watertightness due to high rib and 360degrees seaming.

Profile dimension : Cover width 475/ Rib height 75 mm
Base metal Thickness (BMT) : 0.42, 0.45, 0.48, 0.55 mm
Zincalume (TCT) : 0.47, 0.50, 0.53, 0.60 mm
Strength of Steel : G550 MPa (Min Yield strength 550 MPa)
Coating : Zincalume and Colorbond steel
Recommend min. roof slope : 1°
Application : Straight, Curve, Roofing

Adding an elegance and warmth by Concealed-fixed Wall System

Steel Metal Wall Sheet is one of the most popular sheets for cladding into multiple designs, it can be designed for luxury, outstanding with patterns, colors and themes. Besides, Concealed-fixed Walling System creates more beauty of the sheet and overall.

Sharing story from high building through KS FlorDek

The columns height over 50 meters with the symbol “Phi Ta Khon” on the top is located in Loei Province. Feeling a bit shaking and windy at the same time when looking from the top (at steel beam level) when there is no floor.

To reduce the heat inside the factory with KS VentFlow – the ventilation system

Whether it's an old factory or a new factory if there is no opening at the ridge area, the heat will be generated even more inside the building. Especially for the clay tile factory, there will be more heat due to accumulated heat from burning from the kiln. What should we do to cool the temperature inside the building?

Solving the cavity problem under the roof with Steel Closer

One of the problems that most of you always faced is the cavity problem under the roof, not only the space at the rib but also gap between flashings and sheet. There are chances that bird, mouse or insects and little animals can get into the building and build the nest or cause any damages to your building.

KS Roofing Profile Series No.6 KS TriPro75

KS TriPro75