KS CozySeam Roof Sandwich Panel

KS CozySeam Roof Sandwich Panel is a Composite Roof System, represents the elegance and modern through the wide and smooth panel that perfectly aligned with the architecture. Moreover, it is outstanding with the 360 degree seaming (Standing seam roof system), the fasteners don’t pass through the roof sheet for excellent watertightness. (Architectural Standing Seam).

KS CozySeam Roof Sandwich Panel or Composite Roof System is composed of roof sheet on the top panel and the ceiling on the bottom panel with the insulation in the middle panel installed from the factory like a sandwich. Place the Roof Sandwich Panel over the purlins to increase airy comfort, beauty, modern and reduce the concerned regarding the heat and noise Including the watertiside the houses and buildings.

Product Information

  • Profile cover width : Available form 200 - 835 mm.
  • Profile Rib height : 26, 38 and 51 mm.
  • Base metal Thickness (BMT) : 0.42 - 0.55 mm
  • Clean colorbond (TCT): 0.50 - 0.63 mm
  • Roof Sandwich Panel, Total Thickness : 25 - 100 mm (1 - 4 inch)
  • Minimum Yield Strength : 550 MPa (G550)
  • Min. Roof slope : 2 degree
  • Application : Straight, Curve, Roofing, Walling

System Benefit

COMFORTABLE LIVING
Comfortable living, reduce heat and noise from outside the building

EXCELLENT WATERPROOF
Excellent watertightness with the 360 degree seaming, the fasteners don’t not pass through the roof sheet

ALL-IN-ONE ROOF & CEILING
All-in-one roofing and ceiling with insulation in the middle of panel

SAVE TIME
Save time and easy to install with one step installation

SAVE ENVIRONMENT, SAFE LIFE
Environmentally friendly and safe for health

System Feature

KS CozySeam Roof Sandwich Panel

 KS CozySeam : Top panel

 EPS Foam : Insulation Core

 Bottom panel

 Stainless Clip

Please download brochure or contact us for more information

KS CozySeam Sandwich Panel insulated roof panel, there are 3 types.

KS CozySeam on the top panel. Next to Expanded Polystyrene Foam is high quality insulation (Self-Extinguish Grade), can be recycled. Heat and noise protection with low thermal conductivity (K-Value); thickness 1-4 inches, density of 1.5-2 lb/ft3 resulting in good Compressing Strength, increasing and improving the strength of the roof system. In the bottom panel depending on each type as follows:

Type 1 : KS CozySeam Sandwich type 1 is a smooth type with ready-made insulated roof panel from the factory or known as Composite Roof System where the bottom panel is a KS U – sheet steel ceiling which has smooth surface gives luxury and beauty.

Type 2 : KS CozySeam Sandwich type 2 is a corrugated type, where the bottom panel is a KS Splendid steel ceiling, which has a shallow corrugated like battens that gives warmth.

Type 3 : KS CozySeam Sandwich type 3 is a type without bottom steel panel, bottom panel is EPS insulation. (Recommended purlin spacing is 0.6 meters at 1 inch EPS foam thickness)

Roof System Installation

Installation method for KS CozySeam Roof Sandwich Panel

1. Fix the first set of CozyClip in every purlin

2. Place the first Sandwich Panel over the CozyClip properly

3. Fix the second set of CozyClip in every purlin

Wall System Installation

Installation method for KS CozySeam Wall Sandwich Panel

1. Fix the first set of CozyClip in every wall structure

2. Place the first Sandwich Panel over first CozyClip, keep the wall perpendicular by using the Water Level Gauge

3. Fix second set of CozyClip in every wall structure

Special Flashing Detail (Hidden screw)
Flashing Hidden Screw (Concealed-fixing)

After installation the roof and wall panel (include facade), proceed to place flashing. Flashing hidden screw finished and elegant look for Sandwich Panel and also prevent leakage.

Detail Flashing Hidden screw

Project Reference