Having trouble of choosing the steel roof profile for your garage, how to make your house outstanding and unique? This article will help you with the garage roof extension. Here’s the answer to choosing a suitable steel roof sheet for a garage roof extension with an outstanding and unique design.
The most recommended roof profile is KS CozySeam Sandwich Panel. It is a modern & luxurious design so it will make your house outstanding and unique as desired.
KS CozySeam Sandwich Panel also helps to reduce heat and save energy – with ready-made insulated roof panels. It is an environmentally friendly product and prevents water leakage with specially designed flashing (hidden screw).

However, there are more things to be concerned about regarding garage roof extension
- Garage area: Should be designed to suit the number of cars, the proper size is at least 2.5x5.5 m2. for parking 1 car and 5.5x5.5 m2. for parking 2 cars.
- Garage structure: For safety reasons, it is recommended if there is enough space to expand, the garage structure should be separated from the house structure. But in the case of limited space, should consult with an engineer or an experienced expert before making a decision whether to use wires to fix the house wall or support some garage structure with the house structure.
- Garage floor: Properly prepare the garage floor to slow down the collapse because each car has a different weight if the big car weighs around 2,000 kgs.

Related Products
RELATED TIPS
Adding an elegance and warmth by Concealed-fixed Wall System
Steel Metal Wall Sheet is one of the most popular sheets for cladding into multiple designs, it can be designed for luxury, outstanding with patterns, colors and themes. Besides, Concealed-fixed Walling System creates more beauty of the sheet and overall.
Sharing story from high building through KS FlorDek
The columns height over 50 meters with the symbol “Phi Ta Khon” on the top is located in Loei Province. Feeling a bit shaking and windy at the same time when looking from the top (at steel beam level) when there is no floor.
To reduce the heat inside the factory with KS VentFlow – the ventilation system
Whether it's an old factory or a new factory if there is no opening at the ridge area, the heat will be generated even more inside the building. Especially for the clay tile factory, there will be more heat due to accumulated heat from burning from the kiln. What should we do to cool the temperature inside the building?
Solving the cavity problem under the roof with Steel Closer
One of the problems that most of you always faced is the cavity problem under the roof, not only the space at the rib but also gap between flashings and sheet. There are chances that bird, mouse or insects and little animals can get into the building and build the nest or cause any damages to your building.