Having concerns about Metal sheet, how to ensure the quality and how to choose the right steel profile for your buildings? KS Group would like to share you the information of #KSRoofingProfile – to ensure the quality of the steel sheeting profiles, the beauty roofing, water leakage protection and heat & noise reduction.
KS BgroovePlus is the nineth profile for this series. It is a Bolt system that is the answer for cost-effective solution, it also responds to variety of designs and creates a beauty for your building. KS BGroovePlus has an evenly symmetrical rib profile, width 630mm. and height 25mm. which can be seen easily, suitable for roofing, walling and ceiling.
- Install with Bolt system
- Recommended minimum roof slope angle at 5 degrees
- Good water leakage protection
- Strengthen, profile ability and long support spacing
- Flexible, easy to curve and available for multiple designs
- Can be rolled-form or custom length or on-site for long length roof as required
- Resistant to weather corrosion which make the building last longer
- Fully Roof System with roof sheet, accessories, insulation, and ventilation system will reduce heat and create cool temperature to the building
- Profile dimension : Cover width 630/Rib height 25 mm
- Base metal Thickness (BMT) : 0.42, 0.45, 0.48, 0.55 mm
- Zincalume (TCT) : 0.40, 0.43, 0.47, 0.50, 0.53, 0.60 mm
- Strength of Steel : G550 MPa / G300 MPa (Min Yield strength)
- Coating : Zincalume and Colorbond steel
- Recommend min. roof slope : 5°
- Application : Straight, Curve, Roofing, Walling, Ceiling
- Method of installation : Bolt system that fixed by self-drilling screw
- Screw : Refer to AS3566 Class 3 or class 4
For more information, please read following articles #The Steel Roof Sheet, an interesting choice #How to choose roof sheet type? #Who should be using steel roof sheet?
Comfortable… maximum product warranty at 30 years
Confident… a beautiful, strengthen and durable premium quality steel roofing and walling sheet that certified products by engineering tests and obtained certificates
Reliability… with experiences in metal sheet roofing system over 30 years
Adding an elegance and warmth by Concealed-fixed Wall System Steel Metal Wall Sheet is one of the most popular sheets for cladding into multiple designs, it can be designed for luxury, outstanding with patterns, colors and themes. Besides, Concealed-fixed Walling System creates more beauty of the sheet and overall. KS Group collects all excellent and […]
Sharing story from high building through KS FlorDek The columns height over 50 meters with the symbol “Phi Ta Khon” on the top is located in Loei Province. Feeling a bit shaking and windy at the same time when looking from the top (at steel beam level) when there is no floor.
To reduce the heat inside the factory with KS VentFlow – the ventilation system Whether it's an old factory or a new factory if there is no opening at the ridge area, the heat will be generated even more inside the building. Especially for the clay tile factory, there will be more heat due to […]
Solving the cavity problem under the roof with Steel Closer One of the problems that most of you always faced is the cavity problem under the roof, not only the space at the rib but also gap between flashings and sheet. There are chances that bird, mouse or insects and little animals can get into […]